Ford Mustang Rack and Pinion Rebuilding Deposit
Price range: $100.00 through $700.00
Description
We are able to service 2nd gen, 3rd gen, and 4th gen Mustang rack and pinions for rebuild. Whether your rack is gushing fluid or you just want a “tune-up” for the upcoming race season, our rebuilding service will bring your Mustang rack back to its peak potential. Read more about our services below, and if you have questions about our rebuilding services or process, please contact us.
4th Gen Mustang Rack & Pinions (1994-2004)
This later style of Mustang rack bridges 3rd-gen and 4th-gen Mustangs. In addition to a standard rebuild, we have the capability of upgrading these racks to Mustang R-Spec tuning standards. R-Spec racks are highly coveted and nearly impossible to purchase, so upgrading your basic rack during rebuild is an easy and guaranteed way to improve road feel.
R-Spec Upgrade Information
Contrary to popular belief, the R-Spec rack and pinion did not have a different rack ratio, but rather a custom-valve profile to increase steering effort by about 25-30% compared to a standard model. This is also applicable to the SVO model. This higher effort provides better road feel and feedback to what the front of the car is doing. This is especially desired for drag, autocross, and road racing applications where it is critical that the driver feels the front-end response. Our R-Spec rebuild does just that – increase your steering effort by 25-30% to match R-Spec valving. This modification is done while we perform the regular rack rebuild, and only takes slightly longer for turnaround.
This upgrade is only available for 1999-2004 model years with the triangle/tri-lobe input shaft.
Please refer to the Rebuild Checkout Process before placing your order
Please Follow the Checkout Process Below:
1) Complete our online checkout, where you pay an initial deposit for your rack rebuild. Please enter the year and model of your rack during checkout.
2) You will receive a 4-digit order # after you complete the checkout (xxxx). Please either write this order # on the shipment package, OR include a printed paper with your shipment that shows the order #.
3) Ship us your rack & pinion however you would like. You can use your choice of shipping provider and packaging. Please make sure that your hose ports are capped, and no fluid will escape the rack during shipping. If possible, we also recommend removing the inner tie rods of the rack to help make it shorter and less expensive to ship. However, this is not necessary if you don't feel comfortable doing so. We do not need the inner tie rods or boots to complete the rebuild, but if you include the originals, we will reinstall them for no additional charge.
4) If you know that you would like or need to replace the inner tie rods or boots, we recommend you purchase these ahead of time and include them with your rack shipment. The inner tie rods or boots should be replaced if they are ripped or showing other damage. We will install new boots & tie rods for no additional cost and send back the assembled rack. Our rebuilding services DO NOT include new tie rods or boots.
5) Please leave the high-pressure hard lines attached to the rack (they connect the valve housing to the rack tube). We need these with the rack to properly dyno test your rack after rebuilding.
6) Ship it!
Our shipping address is:
40 W Morley Dr
Saginaw, MI 48601
