Ford/Lincoln Rack and Pinion Deposit

Description

If you are interested in a rebuild on your Ford or Lincoln rack and pinion you have come to the best place. We advise you to contact us before completing the checkout to confirm your rack model is rebuildable and to confirm the cost associated with the rebuild. There may be select models/years that we are unable to service.

If you have a Mustang rack and pinion please complete the specific checkout for Mustang.

Expedite Service:
Our expedite service bumps your rebuild to the top of the priority list. We DO NOT guarantee a specific turnaround time for this service, as each individual rack can require a different amount of service. This does speed up the turnaround time from what your rack would have been under standard turnaround.

Please Follow the Checkout Process Below:

1) Complete our online checkout, where you pay an initial deposit for your rack rebuild. Please enter the year and model of your rack during checkout.

2) You will be issued a 4-digit order # after you complete the checkout (xxxx). Please make sure to either write this order # on the shipment package, OR include a printed paper with your shipment that shows the order #.

3) Ship us your rack & pinion however you would like. You can use your choice of shipping provider and packaging. Please make sure that your hose ports are capped and that no fluid is able to escape the rack during shipping. If possible, we also recommend removing the inner tie rods of the rack to help make it shorter and less expensive to ship, but this is not necessary if you don’t feel comfortable doing so. We do not technically need the inner tie rods or boots to complete the rebuild, but if you include the originals we will reinstall them for no additional charge.

4) If you know that you would like to (or need to) replace the inner tie rods or the boots (if they are ripped), we recommend purchasing these ahead of time yourself and including with your rack shipment. We will install new boots & tie rods for no additional cost and send back the assembled rack. New tie rods and boots are NOT included as part of our rebuilding service.

5) Make sure to leave the high pressure hard lines attached to the rack (they connect the valve housing to the rack tube). We need these with the rack in order to properly dyno test your rack after rebuild.

6) Ship it!

Our shipping address is:
40 W Morley Dr
Saginaw, MI 48601