Ford/Lincoln Rack and Pinion Deposit
Price range: $100.00 through $300.00
Description
If you are interested in a rebuild for your Ford or Lincoln rack and pinion, you have come to the right place! We advise you to contact us before completing the checkout to confirm your rack model is rebuildable and to confirm the cost associated with the rebuild. There may be select models/years that we are unable to service.
If you have a Mustang rack and pinion, please complete the specific checkout for Mustang.
Expedite Service:
Our expedited service bumps your rebuild to the top of the priority list. We DO NOT guarantee a specific turnaround time for this service, as each individual rack can require a different amount of service. This does speed up the turnaround time from what your rack would have been under standard turnaround.
Please refer to the Rebuild Checkout Process before placing your order
Please Follow the Checkout Process Below:
1) Complete our online checkout, where you pay an initial deposit for your rack rebuild. Please enter the year and model of your rack during checkout.
2) You will receive a 4-digit order # after you complete the checkout (xxxx). Please either write this order # on the shipment package, OR include a printed paper with your shipment that shows the order #.
3) Ship us your rack & pinion however you would like. You can use your choice of shipping provider and packaging. Please make sure that your hose ports are capped, and no fluid will escape the rack during shipping. If possible, we also recommend removing the inner tie rods of the rack to help make it shorter and less expensive to ship. However, this is not necessary if you don't feel comfortable doing so. We do not need the inner tie rods or boots to complete the rebuild, but if you include the originals, we will reinstall them for no additional charge.
4) If you know that you would like or need to replace the inner tie rods or boots, we recommend you purchase these ahead of time and include them with your rack shipment. The inner tie rods or boots should be replaced if they are ripped or showing other damage. We will install new boots & tie rods for no additional cost and send back the assembled rack. Our rebuilding services DO NOT include new tie rods or boots.
5) Please leave the high-pressure hard lines attached to the rack (they connect the valve housing to the rack tube). We need these with the rack to properly dyno test your rack after rebuilding.
6) Ship it!
Our shipping address is:
40 W Morley Dr
Saginaw, MI 48601